Линейный регулятор AirCom DSP-DB5

Description

Adjustable pressure switch for monitoring pressure, vacuum and
differential pressure. From the 6 bar device on two turns of
the adjusting knob are necessary for the whole adjustment range,
so the scale on the knob is inappropriate.

Media: compressed air, non-corrosive gases or liquids

Overpressure: see chart
Switch_contact: SPDT switch with silver contact,
optionally gold contact
Contact_load: 2 A at 24 V DC, 6 A at 250 V AC
Electrical_connector: AMP spade terminal, 6.3 x 8 mm,
according to DIN 46244
Hysteresis: see chart
Life_cycle: 1E7 switching cycles
Vibration_resistance: 20 g
Certifications: VDE, TÜV design test, optionally Atex
Switching_time: 30 ms
Mounting_position: any, but indication needed for
switch point < 100 mbar
Protection_class: IP 65 w/ coupling socket

Temperature_range:
-20 °C to 85 °C / -4 °F to 185 °F for NBR/Buna-N, EPDM and polyamide,
up to 130 °C / 266 °F for FKM

Body: Zytel, a high-quality polyamide
Elastomer: NBR/Buna-N, optionally EPDM, FKM or special FKM
(saturated steam-resistant)
Pressure_connection: brass, at DSP-W polyamide,
optionally stainless steel or PVDF