Пневматический блок AirCom C250-03HC

Description

Made up of modular components which can be combined to form
compact units. Switch-on and soft start valves available as
additional modules.

Media: compressed air or non-corrosive gases

Supply_pressure:
max. 12.5 bar,
max. 7 bar at lubricator with oil level indicator,
max. 16 bar for Series 042

Gauge_port: G1⁄8 or G1/4 at series 095, on both sides of the body,
one screw plug supplied

Filter: element 20 Μm, optionally 5 Μm, made of sintered polyethylene
Bowl: plastic version with bayonet catch, series 042 with connection thread
Drain: manual drain with semiautomatic drain, optionally automatic drain
Oil_refilling: optionally with semiautomatic oil refilling without need
to interrupt operation
Oil_level_indicator: If the oil level falls below the limit value, a float
will close a signal contact.
Contact: NO Voltage = max. 115 V

Temperature_range: 0 °C to 50 °C / 32 °F to 122 °F

Body: nylon, POM at series 042
Inner_valve: brass
Bowl: polyamide Thread insert: brass
Elastomer: NBR/Buna-N